How hard to put on a....
#21
RE: How hard to put on a....
As for mounting here is a pic of a mock up I did with my old rad using just aluminmum strap and screws...fan does not move once in place and allowed me to trim and reuse the stock shroud to keep the stock look.
Mock up:
In place:
Shroud reinstalled:
Mock up:
In place:
Shroud reinstalled:
#22
RE: How hard to put on a....
good instal,
i have 2 of the 1/2 very thick luggage straps with steel hooks, they work real good as well.
Along with those aftermarket plastic pieces that go through the radiator and lock , with a padded foam backing.
But compared to that factory fan, when the taurus fan was wired to test, it blew like a tornado!
i have 2 of the 1/2 very thick luggage straps with steel hooks, they work real good as well.
Along with those aftermarket plastic pieces that go through the radiator and lock , with a padded foam backing.
But compared to that factory fan, when the taurus fan was wired to test, it blew like a tornado!
Thread
Thread Starter
Forum
Replies
Last Post
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM