Stock Shifter
01-23-2007, 01:46 AM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location:
Posts: 336
RE: Stock Shifter
What would be a good estimate at about 65-70 im at 2500rpm
01-23-2007, 01:53 AM
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: Stock Shifter
under ax.... codes all are
m=2.73
z=3.08
e=3.27(auto only)
01-23-2007, 01:55 AM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
RE: Stock Shifter
Quote:
ORIGINAL: 89 5.0 Mustang
What would be a good estimate at about 65-70 im at 2500rpm
sounds like 3.73's to me...
01-23-2007, 01:59 AM
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: Stock Shifter
i have 3.08s, i think 2k is about 60 mph...close atleast.
01-23-2007, 02:01 AM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
RE: Stock Shifter
3.08's is ~2200 rpms at 80mph
01-23-2007, 02:04 AM
4th Gear Member
Join Date: Jun 2006
Location: Marietta, ga
Posts: 1,050
RE: Stock Shifter
just wondering, but when you say the rpm and speed. what gear would you be in when you measure it or whatever?
01-23-2007, 02:05 AM
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: Stock Shifter
^ i have a feeling its higher.. ill check tomorrow... i could be wrong... or could have diff gears and just not no it... that would be nice
01-23-2007, 02:57 AM
5th Gear Member
Join Date: Nov 2004
Location: Texas
Posts: 3,834
RE: Stock Shifter
I'm running 2k rpm's at 70 w/ 3.55's and a Zspec T5 [.63 OD instead of .68].....I would guess 3.73's as well if it's a T5, not TKO.
01-23-2007, 03:02 AM
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: Stock Shifter
were refering to our 5th gear.
01-23-2007, 03:08 AM
4th Gear Member
Join Date: Jun 2006
Location: Marietta, ga
Posts: 1,050
RE: Stock Shifter
Quote:
ORIGINAL: dimebag
were refering to our 5th gear.
i figured, but thanks for the conformation.