Ecstasy

i took all that off but i did it when i was changing intake manifolds, i undid it all, if im not mistaken i just flipped the metal thing over and bolted it up, ill look tom.

[IMG]local://upfiles/26824/FA9BCA2BEFAE4B628127DD5F6C98AF75.jpg[/IMG]

[IMG]local://upfiles/26824/C69DE7BD147B4C43BE38A2263753BA43.jpg[/IMG]

[IMG]local://upfiles/26824/46B962CCE0E14B648803F085EF6EEB91.jpg[/IMG]

Bwebb Stang

What metal thing did you flip over

Ecstasy

on the back of the motor they had like a little metal thing, i dont know how to explain it.

93 LX FiveO

its a pipe that runs from the back of the intake to the check valve (i think thats what hes talking about)

5ohfox

so to delete the metal tubing that goes from the back of each head in the back of the motor..all you have to do is thread two 5/8 bolts back there..where could i pick them up at? a hardwear store?

luckythirteen13

yes

88BlueGT

Have fun getting the steel bar thing that runs behind the motor.... I dont know how you guys do it without air tools, I grinded at that bitch for like a half hour before I got it out! And the bolts in the heads were the BIGGEST PITA job I think I ever done lol

luckythirteen13

really?? mine came right off. just used a wrench and the bolts broke loose easy

5ohfox

oh, i just took the tube when i pulled the motor out. but now i just have to put the bolts back in..

turbosha

its made from stainless i cut mine off flush and flipped em around so the back blocked the holes.