5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

output shaft splines

Thread Tools
 
Search this Thread
 
Old 02-02-2007, 01:09 AM
  #1  
militarymustang88gt
2nd Gear Member
Thread Starter
 
militarymustang88gt's Avatar
 
Join Date: Dec 2006
Location:
Posts: 221
Default output shaft splines

how many splines does a stock trans have and a world class tko?
militarymustang88gt is offline  
Old 02-02-2007, 02:48 AM
  #2  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: output shaft splines

stock I think is 28

tko is 31
primetime5.0 is offline  
Old 02-02-2007, 03:08 AM
  #3  
militarymustang88gt
2nd Gear Member
Thread Starter
 
militarymustang88gt's Avatar
 
Join Date: Dec 2006
Location:
Posts: 221
Default RE: output shaft splines

thats what i was thinkin i ordered an new driveshaft and i only counted 27 splines so i was confused i am gonna have to send it back and get a new one
militarymustang88gt is offline  
Old 02-02-2007, 03:18 AM
  #4  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: output shaft splines

why not just change the yolk?
primetime5.0 is offline  
Old 02-02-2007, 05:57 AM
  #5  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: output shaft splines

ORIGINAL: primetime5.0

why not just change the yolk?
thats exactly what you have to do for a tremec... but you should know that ciz you have one

Click here for link to buy a 31 spline yolk!
AdderMk2 is offline  
Old 02-02-2007, 09:27 PM
  #6  
militarymustang88gt
2nd Gear Member
Thread Starter
 
militarymustang88gt's Avatar
 
Join Date: Dec 2006
Location:
Posts: 221
Default RE: output shaft splines

i know i bought the yoke for the stock driveshaft at the time but i just got an aluminum one and it supposedly came with the yoke for the tko and when i counted it it was 28 and i couldnt remember if i had the spine count mixedup between the trans
militarymustang88gt is offline  
Old 02-02-2007, 09:28 PM
  #7  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: output shaft splines

ORIGINAL: militarymustang88gt

i know i bought the yoke for the stock driveshaft at the time but i just got an aluminum one and it supposedly came with the yoke for the tko and when i counted it it was 28 and i couldnt remember if i had the spine count mixedup between the trans
you can swap the yolk from the the stock driveshaft if it fits the tko
AdderMk2 is offline  
Old 02-02-2007, 10:58 PM
  #8  
militarymustang88gt
2nd Gear Member
Thread Starter
 
militarymustang88gt's Avatar
 
Join Date: Dec 2006
Location:
Posts: 221
Default RE: output shaft splines

i was lookin at it but it looks like the u joints on the new shaft are like a half inch bigger
militarymustang88gt is offline  
Old 02-02-2007, 11:01 PM
  #9  
militarymustang88gt
2nd Gear Member
Thread Starter
 
militarymustang88gt's Avatar
 
Join Date: Dec 2006
Location:
Posts: 221
Default RE: output shaft splines

thanks for the link i am going to get a new u joint and i am going to see if it fits if not i will just order a new yoke
militarymustang88gt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
bradleyb
California Regional Chapter
0
10-01-2015 01:02 AM
spamedic
2005-2014 Mustangs
2
09-09-2015 12:15 AM
cbird1177711
2005-2014 Mustangs
2
09-03-2015 08:43 PM



Quick Reply: output shaft splines



All times are GMT -5. The time now is 08:54 PM.