5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Rear End Questions/Suggestions

Thread Tools
 
Search this Thread
 
Old 02-13-2007, 12:57 AM
  #1  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default Rear End Questions/Suggestions

K so i got the notch in the sig with those aftermarkets. i just picked up a pair of ranger axles and drums because im workin on the 5 lug conversion. i had 5 lug spindles for the front but they are only good til 86 which didn't occur to me before doing this swap ( i had them for my 86 before the hail totalled it) anyways i decided to do the 5 lug conversion cause i will be bringing it to the track this spring/summer/fall to race. So i was looking at posi's and started thinking maybe i should go with 31 spline axles/posi. I want to make sure that i don't ever have to buy bigger spline for when i get some more horse power in the future. So bassically im looking for a 5 lug conversion all the way around. The front 5 lug spindles, rear5lug 31spline axles (both with long studs) a 31 spline posi, and new gears. I am debatting between 3:73 and 3:55 being the car is still my daily driver when it isn't snowing. Also need a drive shaft loop. Do you guys know of any good packages that contain some/all of these items for a reasonable price? THanks
Pearlkobra12 is offline  
Old 02-13-2007, 08:44 PM
  #2  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default RE: Rear End Questions/Suggestions

?
Pearlkobra12 is offline  
Old 02-13-2007, 08:50 PM
  #3  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: Rear End Questions/Suggestions

there is a whole lot of BS in that post that I dont feel liek reading

try seperating your comments and questions... and its not called POSI... you dont drive a ****ing camaro


its Traction-lok

of trac-lok... t-lok for short
AdderMk2 is offline  
Old 02-13-2007, 09:04 PM
  #4  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default RE: Rear End Questions/Suggestions

k sorry u dont have to be a dick about it... ill try again
this is waht i need
~ 5 lug 31 spline axles
~ Traction-Lok 31 spline
~ Gears 3:55 or 3:73
~ Front Rotors 5 lug
~ Driveshaft Loop
What do you guys suggest for these brand wise?
Anyone know of some good packages?
Thats a lil cleaner...
Pearlkobra12 is offline  
Old 02-14-2007, 12:59 AM
  #5  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default RE: Rear End Questions/Suggestions

does no one on this forum have an idea for me?
Pearlkobra12 is offline  
Old 02-14-2007, 01:05 AM
  #6  
90Lxstanger
3rd Gear Member
 
90Lxstanger's Avatar
 
Join Date: Dec 2006
Location:
Posts: 959
Default RE: Rear End Questions/Suggestions

not to be a dick either, but i think you'll have better luck searching for a package in a catalog order, not a forum site.
90Lxstanger is offline  
Old 02-14-2007, 01:07 AM
  #7  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default RE: Rear End Questions/Suggestions

i was just wonderin if anyone had seen a good one because there are what seems like thousands of different companies
Pearlkobra12 is offline  
Old 02-14-2007, 01:10 AM
  #8  
89 fox
4th Gear Member
 
89 fox's Avatar
 
Join Date: Jun 2006
Location: BATON ROUGE
Posts: 1,262
Default RE: Rear End Questions/Suggestions

buy a rear end out of a SN95 and put gears in it
89 fox is offline  
Old 02-14-2007, 01:11 AM
  #9  
Pearlkobra12
2nd Gear Member
Thread Starter
 
Pearlkobra12's Avatar
 
Join Date: Jun 2006
Location:
Posts: 417
Default RE: Rear End Questions/Suggestions

they came with t-lok? and 31 spline axles?
Pearlkobra12 is offline  
Old 02-14-2007, 01:16 AM
  #10  
SSKiller
4th Gear Member
 
SSKiller's Avatar
 
Join Date: May 2006
Location: Scottsdale, AZ
Posts: 1,677
Default RE: Rear End Questions/Suggestions

ORIGINAL: Pearlkobra12

k sorry u dont have to be a dick about it... ill try again
this is waht i need
~ 5 lug 31 spline axles
~ Traction-Lok 31 spline
~ Gears 3:55 or 3:73
~ Front Rotors 5 lug
~ Driveshaft Loop
What do you guys suggest for these brand wise?
Anyone know of some good packages?

Thats a lil cleaner...
This is my set up.

Moser 31 Spline Axles.
Detroit True-Trac Locker
FRPP 3.73's
Powerslot 5 Lug Rotors
Lakewood Drive Shaft Loop
SSKiller is offline  


Quick Reply: Rear End Questions/Suggestions



All times are GMT -5. The time now is 11:50 AM.