5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

4th gear and 4.10s

Thread Tools
 
Search this Thread
 
Old 02-28-2007, 10:29 PM
  #11  
SN95Stang
2nd Gear Member
Thread Starter
 
SN95Stang's Avatar
 
Join Date: Jan 2006
Location:
Posts: 324
Default RE: 4th gear and 4.10s

ok well im putting gt40 heads intake and a B cam on a 306 which i will be dropping in in about 6 months.......and the motor will hav about a 100 shot sprayed occaisionally.....this is a no go for 4.10s?
SN95Stang is offline  
Old 02-28-2007, 10:33 PM
  #12  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: 4th gear and 4.10s

it won't last long I run some 3.73 and spinning the ole S/C well over 40k rpms[:@]
ORIGINAL: AdderMk2

ORIGINAL: 2 kwik

crap..my bad
lol... we all screw up from time to time


SN95Stang. You wilkl be fine with the 4.10's until you start making more power. H/C/I will get you closer to needing to shift again, Nitrous will definitly require a taller rear end gear, and you'll hate trying to race on 4.10's with a supercharger

2 kwik is offline  
Old 02-28-2007, 10:35 PM
  #13  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 4th gear and 4.10s

ORIGINAL: SN95Stang

ok well im putting gt40 heads intake and a B cam on a 306 which i will be dropping in in about 6 months.......and the motor will hav about a 100 shot sprayed occaisionally.....this is a no go for 4.10s?
It would be a good idea for you to cinsider 3.73's or 3.55's

People go with big gears to make up for what their motor lacks
AdderMk2 is offline  
Old 02-28-2007, 10:37 PM
  #14  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: 4th gear and 4.10s

what? mr 3.73-4.10 is finally seeing the 3.55 light?
2 kwik is offline  
Old 02-28-2007, 10:38 PM
  #15  
SN95Stang
2nd Gear Member
Thread Starter
 
SN95Stang's Avatar
 
Join Date: Jan 2006
Location:
Posts: 324
Default RE: 4th gear and 4.10s

but for the time being, with my current mods, you think the 4.10s are ok? i will b able to stay in 4th gear in the 1/4?
SN95Stang is offline  
Old 02-28-2007, 10:39 PM
  #16  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: 4th gear and 4.10s

yes..but, what ht. tire is being used
2 kwik is offline  
Old 02-28-2007, 10:39 PM
  #17  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 4th gear and 4.10s

ORIGINAL: 2 kwik

what? mr 3.73-4.10 is finally seeing the 3.55 light?
since when have I ever been a 4.10 person???

I was originally considering 3.55's because I had planned on turbocharging my car. Then i dropped the turbo idea and was going to run a 306 with nitrous, So I stepped up to 3.73's. I would NEVER run 4.10's in my car. I'm STILL considering the 3.55's or my 351 swap
AdderMk2 is offline  
Old 02-28-2007, 10:41 PM
  #18  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: 4th gear and 4.10s

I'm going back to 3.27's in my S/C car
2 kwik is offline  
Old 02-28-2007, 10:44 PM
  #19  
SN95Stang
2nd Gear Member
Thread Starter
 
SN95Stang's Avatar
 
Join Date: Jan 2006
Location:
Posts: 324
Default RE: 4th gear and 4.10s

Im running BFG D/Rs 275/40/17s........i wanna get a 28 inch tire when i get my drag lites.
SN95Stang is offline  
Old 02-28-2007, 10:44 PM
  #20  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: 4th gear and 4.10s

ORIGINAL: 2 kwik

I'm going back to 3.27's in my S/C car
I'm holding onto my 3.08's for the time being... Until I break something, then im swapping out to a 31 spline setup
AdderMk2 is offline  


Quick Reply: 4th gear and 4.10s



All times are GMT -5. The time now is 10:57 PM.