now this is an AOD!!
03-03-2007, 09:13 AM
#31
2nd Gear Member
Join Date: Nov 2006
Location: SoCal
Posts: 280
RE: now this is an AOD!!
ORIGINAL: luckythirteen13
neither. i paid nothing out of my pocket for the tranny. i work at disneyland and get $hit cheap. i bought a TON of those traiding pins and sold them on ebay for outrages profits. i made about $1800 proffit in11-12 weeks selling those things. in fact, im still selling them lol. one person bought56 identical pins from me for almost $200. then i made about $400 profit from a roll cage i fab'd for a friend of a friend. i was broke when i started this project and i have about $400 to my name right now so im doing ok. and my credit card has only $24 on it, and thats my gym fee[8D]
i also cashed out all my vacation hours i had earned at work. 80hours at $12.34 an hour is almost $1000. i figure i graduate college in may so f*ck disneyland im getting a real job so what do i need vacation hours for.
and the header install was a nightmare, thanks for making think about it again[:@]lol
neither. i paid nothing out of my pocket for the tranny. i work at disneyland and get $hit cheap. i bought a TON of those traiding pins and sold them on ebay for outrages profits. i made about $1800 proffit in11-12 weeks selling those things. in fact, im still selling them lol. one person bought56 identical pins from me for almost $200. then i made about $400 profit from a roll cage i fab'd for a friend of a friend. i was broke when i started this project and i have about $400 to my name right now so im doing ok. and my credit card has only $24 on it, and thats my gym fee[8D]
i also cashed out all my vacation hours i had earned at work. 80hours at $12.34 an hour is almost $1000. i figure i graduate college in may so f*ck disneyland im getting a real job so what do i need vacation hours for.
and the header install was a nightmare, thanks for making think about it again[:@]lol
Kick *** set-up by the way.Gotta love a tricked out auto.Good luck with the trans install.
03-03-2007, 05:20 PM
#32
6th Gear Member
Thread Starter
Join Date: May 2004
Location: las vegas, nv
Posts: 9,092
RE: now this is an AOD!!
ORIGINAL: SSKiller
I smell a spray vs boost race coming.....huh jeremy?
I smell a spray vs boost race coming.....huh jeremy?
kelly volunteered me to run a 95gt with a 347 & 200shot. the owner claims 614rwhp but is affraid on my car because it has a trans brake.tranny is in, went in with the motor all at once. finally got the exhaust to line up right. mac headers are very well designed. less then .25" of clearance in any direction. they are a perfect fit.
03-03-2007, 09:23 PM
#35
6th Gear Member
Thread Starter
Join Date: May 2004
Location: las vegas, nv
Posts: 9,092
RE: now this is an AOD!!
a few more pics.
something tells me ill be needing this in the not too distant future
believe it or not, there actually is clearance you just cant tell from this angle
this is the underside of the tranny with the pan off.
this is the huge spring that sets my tranny oil pressure
something tells me ill be needing this in the not too distant future
believe it or not, there actually is clearance you just cant tell from this angle
this is the underside of the tranny with the pan off.
this is the huge spring that sets my tranny oil pressure
03-03-2007, 09:25 PM
#36
6th Gear Member
Thread Starter
Join Date: May 2004
Location: las vegas, nv
Posts: 9,092
RE: now this is an AOD!!
i just thought this looked cool. the flange on the collector is at most 1/8" from the floor board on each side. now thats some quality work!
this is my command center.
this is the command center with all the wires exposed (except the ones that run the electric fan)
this is my command center.
this is the command center with all the wires exposed (except the ones that run the electric fan)
Thread
Thread Starter
Forum
Replies
Last Post
