GT40 Heads and DYNO SHEETS
#11
RE: GT40 Heads and DYNO SHEETS
say adder i was hopin u could maybe give me some good info on this mega squirt sd setup thing. i have talked to evo performance and they said they have never heard of it. i was hopin maybe u could shed some light, give me a site i could go to or explain it?
thanks
thanks
ORIGINAL: AdderMk2
Heres my ONLY existing dyno sheet. I can not prove mt 270hp because I dont have the sheet. Another trip to the dyno is soon comming.
gt-40 heads, cobra cam, cobra intake.
BBK equal shorties, BBK o/r X and MAC pro dumps
UDP's, 70mm tb, CAI, 15° timing, and a 15.5:1 air fuel ratio.
253.5 rwhp and 294.7tq
ORIGINAL: Jasperstang308
i told him 240 so i wasn't that far off. well it also has lt with a prochamber and flows but that shouldn't make that much of a difference
i told him 240 so i wasn't that far off. well it also has lt with a prochamber and flows but that shouldn't make that much of a difference
gt-40 heads, cobra cam, cobra intake.
BBK equal shorties, BBK o/r X and MAC pro dumps
UDP's, 70mm tb, CAI, 15° timing, and a 15.5:1 air fuel ratio.
253.5 rwhp and 294.7tq
#12
RE: GT40 Heads and DYNO SHEETS
ORIGINAL: jtmustang
350 theres no way with the stock intake. i am doing my motor right now ported cast gt 40's tfs intake,1.6 rollers,tfs 1 cam,full exhaust,ac/smog delete,underdrive pullies,65mm tb,73 c&l,.030 forged trw's,hi flow water pump and im hoping for like somewhere between 270-280 to the wheels do u think those numbers are close sorry for sidetracking your thread jasper just curious. thanks
350 theres no way with the stock intake. i am doing my motor right now ported cast gt 40's tfs intake,1.6 rollers,tfs 1 cam,full exhaust,ac/smog delete,underdrive pullies,65mm tb,73 c&l,.030 forged trw's,hi flow water pump and im hoping for like somewhere between 270-280 to the wheels do u think those numbers are close sorry for sidetracking your thread jasper just curious. thanks
i think i could have seen at least 350rwhp with the afrs that i was saving for with boost friendly cr.
i can't wait to throw it in his face.
he wants to race me in the notch once i can get a motor together
#13
RE: GT40 Heads and DYNO SHEETS
ORIGINAL: ih8chevy
say adder i was hopin u could maybe give me some good info on this mega squirt sd setup thing. i have talked to evo performance and they said they have never heard of it. i was hopin maybe u could shed some light, give me a site i could go to or explain it?
thanks
say adder i was hopin u could maybe give me some good info on this mega squirt sd setup thing. i have talked to evo performance and they said they have never heard of it. i was hopin maybe u could shed some light, give me a site i could go to or explain it?
thanks
#14
RE: GT40 Heads and DYNO SHEETS
look in my profilei have aol so
ORIGINAL: AdderMk2
thats funny.... i'd rather not try to explain it on here, If you have AIM you could IM me.
ORIGINAL: ih8chevy
say adder i was hopin u could maybe give me some good info on this mega squirt sd setup thing. i have talked to evo performance and they said they have never heard of it. i was hopin maybe u could shed some light, give me a site i could go to or explain it?
thanks
say adder i was hopin u could maybe give me some good info on this mega squirt sd setup thing. i have talked to evo performance and they said they have never heard of it. i was hopin maybe u could shed some light, give me a site i could go to or explain it?
thanks
#15
RE: GT40 Heads and DYNO SHEETS
I'm not going to take the time to scan the sheet, but in January my car made 257 rwhp through the AOD with my mods below. That figures out to 290ish through a manual. Bear in mind that mine are aluminum GT40X heads and probably make significantly more hp than regular GT40's.
#16
RE: GT40 Heads and DYNO SHEETS
ORIGINAL: wythors
I'm not going to take the time to scan the sheet, but in January my car made 257 rwhp through the AOD with my mods below. That figures out to 290ish through a manual. Bear in mind that mine are aluminum GT40X heads and probably make significantly more hp than regular GT40's.
I'm not going to take the time to scan the sheet, but in January my car made 257 rwhp through the AOD with my mods below. That figures out to 290ish through a manual. Bear in mind that mine are aluminum GT40X heads and probably make significantly more hp than regular GT40's.
LOL... you think 257rwhp on an AOD figures to 290 on a t5?????
thats a laugh
#18
RE: GT40 Heads and DYNO SHEETS
Adder, are you always such a dick?
The accepted ratios for powertrain loss that I have always heard of and used are 25% for an automatic and 15% for a manual. Using those numbers, my 257 translates to 342 crank horsepower. Coincidentally, that's within two horsepower of the FRPP crate motor that uses the parts I have on mine, so I'm pretty confident that my hp number is good. Now, if you remember your4th grade arithmetic, take 15% off of 342 and what do you get? 291.266666666.
Any questions?
The accepted ratios for powertrain loss that I have always heard of and used are 25% for an automatic and 15% for a manual. Using those numbers, my 257 translates to 342 crank horsepower. Coincidentally, that's within two horsepower of the FRPP crate motor that uses the parts I have on mine, so I'm pretty confident that my hp number is good. Now, if you remember your4th grade arithmetic, take 15% off of 342 and what do you get? 291.266666666.
Any questions?
#19