pulled codes and need help fixing!
 

hi, trying to get my new engine all dialed in. So i thought i'd pull trouble codes and this is what I got:

KOEO
327

KOER
314
227
536
632
311
327

now my question is what do I need to do to fix these problems. the big problems look like 327, 227. thanks guys[/align]

RE: pulled codes and need help fixing!
 

damn yo, gimme a minute....

RE: pulled codes and need help fixing!
 

327 Electronic pressure transducer (EPT)/differential pressure feedback exhaust (DPFE) sensor/electronic vacuum regulator (EVR)

i dont recall having a DPFE, so i'm gonna have to research this one a bit more.

311- 316 Pulse air/thermactar air system faulty
-air pump solenoids, etc...
227 Engine speed/crankshaft position sensor (CPS)
536 Brake on/off (BOO) switch not activated during self test
632 doesn't exist

RE: pulled codes and need help fixing!
 

yea i know what they mean....trying to figure out how to fix them lol

RE: pulled codes and need help fixing!
 

your running no emissions, so you don't have an airpump or an egr system. why not use the tweecer to shutoff that part of the computer?
aside from that, the only code you should worry about is the crank position. take a peek under there, check for metal shavings on the sensor's tip. if all looks well, replace it.

RE: pulled codes and need help fixing!
 

tweecer. cant get it to work... keep gettin a comm fail message... thats a whole other problem... where is the crank sensor located? and your right no emissions. thanks man for the help.