8Mustang8

ok so i'm thinking about getting the paxton novi 1000 for my 88 notch, mostly because i can afford it, i'm also thinking of maybe an anderson power pipe and a renagade pulley for a little more boost. but heres my questions. The kit i'm looking at says its for Mass Air, Is there any way to run this on speed density or do i have to convert to mass air. I have most of the stuff to convert it i'm thinking i just need the computer but i would rather leave it speed density if i can. second does this supercharger get rid of the ac or anything like that? and the last question is will i still be safe using a 100 shot of nitrous with this if its only like once in a blue moon or do i need to get a smaller shot?

r.barn

You can leave it speed density but you will need a tuner
that knows how to work on it.

I'm actually about to go back to a speed density set-up when I install
my AEM plug-n-play engine computer and dump the MAF

boost + Nos = boom ....... without proper tune

8Mustang8

so even if i lessen it to a 50 shot am i risking to much? So it probably would just be cheaper to buy the mass air computer that i need then have it tuned right? do you know where i can get one still for a good price?

vtecwho

i have heard bad things about the novis. i would go with the vortec sc 1 (trim) its 1900 bucks from mustangs unlimited

8Mustang8

i've heard really good things about the novi's. what bad things have you heard?

86 GT 5.0

down the shot to 25 and you'll be set...

8Mustang8

what if i don't do the power pipe or the pulley right now, would a 100 shot still be pushing it? the supercharger really isn't making that much power, and i don't really want my nitrous to just be sitting there not being used on occasion.

86 GT 5.0

What I've heard is that your shot almost doubles when your running forced induction...

8Mustang8

thats good to know, i didn't know that, do you know for sure or where i can find out?

86 GT 5.0

^^^ Hopefully someone will chime in soon about that but I thing im pretty sure.