gearbanger

13.8 at 98..... i wish i had the $$$ to get some heads and i also got stock gears so you should see 12's with some slicks... hopefully ill get adders headsim just waiting for a call

LX 90

They are made by kelly, CalledFierce They hook up ok now but im stock and they chirp every now and then off the line. As long a i heat them up the hook

stangman94

I got those tires. Sometimes they hook sometimes they dont if I launch the car above 1500 rpms they wont hook at all. (I'm an automatic)

cassidymustang

yeah i had some crapy kelly tires and i spun thru 3rd at the track. good luck

LX 90

Yea i run 14.5 @ 94 but im stock except exhaust. It will be fun

93Mustang5.0

you will love the trickflow intake.


take your time with this, the job isnt all that hard... just time consuming butmake sure that you label everything correctly and torque everything properly. the intake comes with fantastic instructions. you have to torque the intake 3 seperate times. when i did mine i followed that direction and after every torque session i let the intake sit for a few minutes.

have fun and if you do everything right, you'll have a great outcome!

LX 90

Yea i got them for $100 Ea. Latley i have been Heating the shyt of of them. So i dunno when they wear out ill get the nitto NT555R

LX 90

Yeah i hope everything comes out good. I went with #24 injectors. i hope it was enough

cassidymustang

i really like my M/T's but the first time to the track with those and my clutch took a dump. i was pissed but it was a stock clutch

LX 90

Yeah i would get some M/T but i need a street tire that will last a little while