DangerousMind

hey everyone. i have a95 mustang gt andi just got my car tuned yesterday and i thought i would be pleased with my numbers. i ended up with 240 hp and 277 tq. should i be happy with these numbers?
i wanted to know what other people were putting down on stock heads in a 5.0
here is what i have.
stock heads
track heat trick flow intake upper and lower
bbk cold air intake
lightning 90mm maf
30 lb injectors
bbk fuel pressure regulator
70mm throttle body
msd blaster pack and plug wires
trick flow stage 1 cam
bbk fuel pump
bbk shorty headers
bbk off road h pipe
borla cat back

johnjr45

30lb injectors are a little big..

AdderMk2

intake is too big
injectors are too big
heads are too small

thats one mismatched setup.. try again with better parts

5.0stanger

I would be happy..that sounds right on the stock heads.

76stangalang87

I have the below mods made 243hp and 302tq on E7's with factory upper and lower

AdderMk2

i made 253hp on a stock cobra motor with CAI and exhaust

and I was running really lean too

Foxbodyforever

you need to get some aftermarket heads to realize the full potential of the intake and cam, otherwise your gonna be disappointed with the numbers

DangerousMind

on my first dyno, my tunner said the 19lb injectorswere maxed out, and to my knowlege, the injectors can be used up to 75%within mypower, plus im planning on getting the matching heads not too far down the line

ih8chevy

smaller injectors and at the least port out the heads or get some new ones.

DangerousMind

what size injectors should i be running? heads are comming soon