quarter glass
#2
RE: quarter glass
it's easy, you need to get the butyl tape. it's a thick black sealant tape
they will leak if you don't use it.
but there about 9 maybe 7/16" nuts inside the car, holding the window in place by it's studs
after you remove the interior panels in the way (yeah the seat prob needs out too) then you'll see them, remove those and then gently and evenly as possible start to push the window out, that tape is SUPER STICKY And you may most probably break the old window.
mine was smashed out already so it just made a mess.
i didn't use that tape and mine leaks, i tried to use silicone instead, and didn't do too good
they will leak if you don't use it.
but there about 9 maybe 7/16" nuts inside the car, holding the window in place by it's studs
after you remove the interior panels in the way (yeah the seat prob needs out too) then you'll see them, remove those and then gently and evenly as possible start to push the window out, that tape is SUPER STICKY And you may most probably break the old window.
mine was smashed out already so it just made a mess.
i didn't use that tape and mine leaks, i tried to use silicone instead, and didn't do too good
Thread
Thread Starter
Forum
Replies
Last Post
wishinsky
2010-current S197 Appearance Section
1
09-21-2015 09:48 AM