xjedix

Anyone replaced the rack themselves that could answer the above question????

AdderMk2

are you mentally stupid or something... just replace the tie rod

steve58

Addermk2, While I respect all of your mechanical advice, you must be an unpleasant human being, do you have any real friends?
[align=left] [/align]

AdderMk2

you are correct, I am a very abrasive person... but those who know me personally, know that its best to stfu and take my advise... it takes 20 minutes to change a tie rod... and thats all thats bad on his car

xjedix

Sounds like your the stupid one..... read my damn post, I also want to change the steering ratio. Does changing the tie rod also change the ratio....NO!!! Now go drink some bleach and crawl back in your hole!

xjedix

Has anyone replaced a rack and could answer these questions??

How many power steering lines are hooked up to the steering rack??? I was briefly looking at it this morning and could only see one line running into the top of the rack and 2 bolts holding the rack on. Is there more to it that i'm not seeing??

Skyler5.0

[sm=funnypostabove.gif]see i told ya adder is most entertainnig ! But he is right and no it really easy to change out the rack the p/s lines , ends, rack bolts and bushings, and if you do it right you may not need a alignment but i would if you doing all that

steve58

While I know very little about the steering questions on this thread,I would like to thank the adder for not fireing me up after my comment about him, he sure can "dish it out", but he also can "take it"!This changes my oppinion of him, and I highly respect his advise.Steve
[align=left] [/align]

AdderMk2

im not too sure if the foxes have a power steering coolor like my SN-95 does, but you should have one line running to the cooler, then from the cooler to the pump, and one from the pump back down to the rack

Skyler5.0

gee thanks adder now i have to go look but i think they do not havethem