SDHW44

I have an 87 GT with the trickflow intake. I have trick flow valve covers now, but they are black and I dont really like them. im looking into picking up some of the nice ford racing ones. what size will fit? I have seen then in 4 inch tall, 3.75inch, ect.

vanderscoff

i have the black and red ford racing valve covers, there the 3.75 inch ones. i had to get a one inch intake spacer and shave down the throttle linkage bracket a little. but im not sure if it will clear the stock hood.

SDHW44

well, I dont want to make all those changes. Does anyone know what the stock height for the valcovers are? or what size for the ford racing valvecovers I would need.

gspfunk

I got the tall FRPP chrome valve covers w/ my Street Heat intake and had to do the same thing...I got a 1" spacer and ground down my throttle linkage.

It bumps the stock hood a little.... I had to make some adjustments to make it work.

cleanfitty

We ran into trouble with the stock Ford Racing EFI covers and a Cobra intake, and we were unable to use them due to the throtle linkage and bracket. A spacer may have helped, but we tore it back down and put the stock covers back on.

SDHW44

does anyone know the normal height of the stock valve covers?

SDHW44

will these fit? These are 3-3/4 tall

http://www.fordracingparts.com/parts...tKeyField=4846

why the heck are they so $$$ almost 400$ the other one that is 3.90tall is 105$$ why such a price difference?

AdderMk2

let me know if you wanna sell those TFS covers... I might be interested

SDHW44

will do, they are like new. I put them on my new engine and I have only drove the car for less then 4000 miles.