Can't seem to find anyone that knows. (MAF question)
#1
Can't seem to find anyone that knows. (MAF question)
I have checked with a few people locally and noone seems to know the answer. If I buy an 80mm MAF (or any MAF for that matter) from a 1993 or earlier Mustang, can I use it on my 1995 GT? I've never run into teh issue before because I only have two Mustangs. I have a 1995 GT and I have an 87 GT with SD so that doesn't help.
I'm thinking that I can just get an 80mm MAF from an older Mustang, use the flowsheet and my Tweecer to enter the MAF transfer tables, set my high slope, low slope, and breakpoint and I'll be good to go. Or is there some major difference between the SN95 5.0s and the older MAFs?
I'm thinking that I can just get an 80mm MAF from an older Mustang, use the flowsheet and my Tweecer to enter the MAF transfer tables, set my high slope, low slope, and breakpoint and I'll be good to go. Or is there some major difference between the SN95 5.0s and the older MAFs?
Thread
Thread Starter
Forum
Replies
Last Post
TCStangerv6
4.6L (1996-2004 Modular) Mustang
0
08-30-2015 09:01 PM