uni_uni

I have around 2,000$ to put into the car right now, I'm wanting to get all the bolt ons out of the way before I go into the motor. I came up with this list tell me what you think.
mac off road h-pipe
SLP loud mouth 2 cat back
BBK equal lenth headers
BBK 70mm throttle body
Steeda 30lb fuel injectors
BBK aluminum 3 piece underdrive pulley
Ford racing FRPP 3.73 gears
C&L 76mm MAF system
Steeda tri ax shifter



[/align]

92cobra

bad plan, your money could be spent in much better places. always remember suspension before hp and also, whats wrong with a superchager?

uni_uni

I know I could gain more hp with a different plan, but I'd like to have all the supporting mods ready down the road for when I do decide to boost or stroke it.


[/align]

92cobra

how much do those mods total in cash for you?

uni_uni

It came down to about 2100$


[/align]

Maxwelhse

That list kinda sucks... Chassy and suspension first for sure... But even if you choose to ignore that advice your combo doesn't make any sense. Why *30lb* injectors with big MAF and TB on stock cam, intake, and heads?

uni_uni

I've already got some suspension, I'll be able to do a H/C/I within 3 months so if I buy these mods now I'll be in better shape for the H/C/I


[/align]

dimebag

****in, spend 1000 on suspension, 500 on spray, and 500 on 3.73s

stang8689

not a bad list to start if going with H/C/I in 3 months but 3.73 gears would have to be first and some springs and sub frame connectors

CrazyCobraSpeed

do full exhuast and a nice suspesion setup.... that is your best bet... that way if u wanna do a h/c/i ull be able to hook and have good flow... if u want a s/c all ull need is pump injectors and regluator.... but u cant buy injectors now... a stock block couldnt run n thing bigger that 24s and thats pushing it... 30# are just way to much... u cant run them it wont work.... u can add them after u do a h/c/i but not b4