347 stroker
#1
347 stroker
This summer I plan onadding either a superchager or a stroker I know what the prices are for a blower but how much is a decent 347 stroker kit. I will get a cam as well once I figure out which way I am going with my car.
#4
RE: 347 stroker
Just put a good turbo kit on there.
Will make more power for same money.
You will need all new heads, cam and intake for a 347 to
get the power out of it that it is capable of.
Figure on spending $5,000 for either after its all said and done.
Will make more power for same money.
You will need all new heads, cam and intake for a 347 to
get the power out of it that it is capable of.
Figure on spending $5,000 for either after its all said and done.
#5
RE: 347 stroker
http://www.tandlengines.com/347_stroker.html
I am ordering one of these guysthis summer. Screw building one, these guys have a 1 year 12,000 mile warranty and a DVD of your specific engine being dynoed at their facility. They build engines for NASCAR, etc. I have talked to them several times, you can't beat 430 hp and 444 ft/lb for around $4k
I am ordering one of these guysthis summer. Screw building one, these guys have a 1 year 12,000 mile warranty and a DVD of your specific engine being dynoed at their facility. They build engines for NASCAR, etc. I have talked to them several times, you can't beat 430 hp and 444 ft/lb for around $4k
#6
RE: 347 stroker
yeah looks like a pretty nice engine but youre probably not going to get much more outta it i bet its at least 10.1 compression and i bet that was with a carb setup not EFI
ORIGINAL: white94
http://www.tandlengines.com/347_stroker.html
I am ordering one of these guysthis summer. Screw building one, these guys have a 1 year 12,000 mile warranty and a DVD of your specific engine being dynoed at their facility. They build engines for NASCAR, etc. I have talked to them several times, you can't beat 430 hp and 444 ft/lb for around $4k
http://www.tandlengines.com/347_stroker.html
I am ordering one of these guysthis summer. Screw building one, these guys have a 1 year 12,000 mile warranty and a DVD of your specific engine being dynoed at their facility. They build engines for NASCAR, etc. I have talked to them several times, you can't beat 430 hp and 444 ft/lb for around $4k
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM