Injectors - find out what kind
#11
RE: Injectors - find out what kind
I'd deffintly like to get more power out of it...Don't know what im making now... How much you think im making....everything done is
"BBK intake, BBK Headers, BBK xpipe, bbk pullys, Flowmaster dumps, gt40p heads, 5stage port and polish, e303 cam, king cobra clutch, steeda tri-ax shifter, aluminum driveshaft, 355 gears "
"BBK intake, BBK Headers, BBK xpipe, bbk pullys, Flowmaster dumps, gt40p heads, 5stage port and polish, e303 cam, king cobra clutch, steeda tri-ax shifter, aluminum driveshaft, 355 gears "
#12
RE: Injectors - find out what kind
I'd toss 24#ers in your setup...maybe even 30#ers if you're going to really increase your numbers.
I've never messed with that combo before, but if I had to guess Id probably put you around the 250 or so range. Keep in mind this is purely a guess / ballpark figure based on what little experience I have with that particular combo. And I really have no clue how good of a port job you have, what size rockers, etc. As a reference point, i know that the full TrickFlow kit with exhaust can make 285ish rwhp.
I've never messed with that combo before, but if I had to guess Id probably put you around the 250 or so range. Keep in mind this is purely a guess / ballpark figure based on what little experience I have with that particular combo. And I really have no clue how good of a port job you have, what size rockers, etc. As a reference point, i know that the full TrickFlow kit with exhaust can make 285ish rwhp.
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM