Must89gt

I am currently rebuilding my 302 and am going to purchase a Trick Flow cam tomorrow. I was wondering if the stage 2 (.542/.563) is too big for the car. I am putting on the Twisted Wedge heads with the .600" upgrade and the compression will be around 10:1-10.5:1 . I was told that the cam requires a AOD with a 2500+ stall coverter and I have a T-5. I was wondering what people think and if anyone here is running that cam. Answers greatly appreciated. Thanks in advance

mattdel

make sure you have PTV clearance... like whoa...
thats alotta lift

Must89gt

The piston I will be using are the KB made specifically for the Twisted wegde head up to a .600" and was told directly from Keith Black.

mattdel

right then. sounds like a wicked setup.
sorry i'm no help on that cam. i stay away from off the shelf cams

rcdblink716

That cam is way too big for ur set up, U need the stage 1

johnjr45

i have that cam and it sounds sick.. havent really hammered on it yet..