351w h/c/i set-up for 11's
05-12-2007, 10:22 PM
#22
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: 351w h/c/i set-up for 11's
think they are 1-3/4 long tubes (hooker headers) yes different motor mounts, taking out the sway bar, and may have to do some fabricating, cuting a hole in the stock hood
, lakewood struts, moroso springs, sub frames..............and so on
.
but so i could use this cam with the afr 185's and the vic jr. int. manifold....and it will still get me into the 11's? http://store.summitracing.com/partde...p;autoview=sku
, lakewood struts, moroso springs, sub frames..............and so on .
but so i could use this cam with the afr 185's and the vic jr. int. manifold....and it will still get me into the 11's? http://store.summitracing.com/partde...p;autoview=sku
05-13-2007, 12:16 AM
#23
I ♥ Acer
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
RE: 351w h/c/i set-up for 11's
ORIGINAL: 90mustang5.0
think they are 1-3/4 long tubes (hooker headers) yes different motor mounts, taking out the sway bar, and may have to do some fabricating, cuting a hole in the stock hood, lakewood struts, moroso springs, sub frames..............and so on
.
but so i could use this cam with the afr 185's and the vic jr. int. manifold....and it will still get me into the 11's? http://store.summitracing.com/partde...p;autoview=sku
think they are 1-3/4 long tubes (hooker headers) yes different motor mounts, taking out the sway bar, and may have to do some fabricating, cuting a hole in the stock hood
, lakewood struts, moroso springs, sub frames..............and so on .
but so i could use this cam with the afr 185's and the vic jr. int. manifold....and it will still get me into the 11's? http://store.summitracing.com/partde...p;autoview=sku
bump
