ghostface_49

are all ford 5.0 engines the same! if not whats the difference.

jasonvri

standard 302's have a different firing order from a 5.0HO.
The HO motors have the 351w firing order. You need to match the ecu with the firing order of the cam.

Are you looking for a hyd roller cam or do you care?

Why not convert straight to a 351w?


jason

ghostface_49

so i can take a older 5.0 EFI block and heads in a 95 stang

kev2369

You can put a big block in it, with enough work... Another difference is timing covers on 94-95's... Also they make roller and solid setups as well.. Several different factors, such as pistons... The late 80's to early 90's they had forged pistons in them, where the others where cast and i'm thinking that 94-95 were hyper, but not sure... Honestly though bud, unless you are attached to you're car, i'd advise you to sell the v-6 car, and buy a gt cuz you'll be looking at the same money and it takes away a LOT of guess work

w8less

93-95 were hyper

ghostface_49

so to go from a 3.8 to 5.0 i would need complete engine from a 95 5.0 ho , k member, wire harness, computer, what am i missing!

AdderMk2

just buy a car with a 5.0 in it... and ditch the 6... its totally not worth while to swap