blew oil out dipstick??????
#21
RE: blew oil out dipstick??????
I don't use a pcv at all.....you can use a pvc system but you need a very hi flow pcv valve as trhat's what I use for years. I never had any problem with the dipstick running 15 psi only I did when running 9-10 spi[&:]
#22
RE: blew oil out dipstick??????
ORIGINAL: 94IVGT
94 gt 5.0l 5sp. vortech sc. got on it leavin town and a ton of smoke came out of nowere, so i shut it down and saw the dipstick was blown off alittle and oil was coming out of it. no oil or a/f out exhuast, plugs look good, o2s readin good. what would be a cause of this???
94 gt 5.0l 5sp. vortech sc. got on it leavin town and a ton of smoke came out of nowere, so i shut it down and saw the dipstick was blown off alittle and oil was coming out of it. no oil or a/f out exhuast, plugs look good, o2s readin good. what would be a cause of this???
#23
RE: blew oil out dipstick??????
ORIGINAL: piedraco
WHAT COMPRESSION RATIO IS THAT ESTIMATED AT? I WANNA RUN BOOST ON MY BLOCK BUT I THINK I F'D UP AND GOT MY PISTONS TOO HIGH COMPRESSION. 10.2:1....????
WHAT COMPRESSION RATIO IS THAT ESTIMATED AT? I WANNA RUN BOOST ON MY BLOCK BUT I THINK I F'D UP AND GOT MY PISTONS TOO HIGH COMPRESSION. 10.2:1....????
#24
RE: blew oil out dipstick??????
ended up with another blown headgasket today. the third set. it started smoking alittle on the dyno today before it got any pulls out of it, then got worse and worse. the end and time for a new thread for that. thanks
Thread
Thread Starter
Forum
Replies
Last Post