hci
06-04-2007, 06:00 PM
Thread Starter
Join Date: Feb 2006
Location:
Posts: 23
hci
have edelbrock performer heads, track heat upper and lower, 3.73, 5spd, nocats what cam, throttle body, etc
06-04-2007, 06:04 PM
2nd Gear Member
Join Date: Feb 2007
Location: CLINTON CT
Posts: 372
RE: hci
no but there really good parts. are you looking to get some or do you have?
06-04-2007, 06:17 PM
Thread Starter
Join Date: Feb 2006
Location:
Posts: 23
RE: hci
have, tearing down in driveway, just not sure of cam, need roller rockers, injectors?
06-07-2007, 03:49 AM
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 163
RE: hci
Look at edlebrock's site and see if they recommend anything for those heads. If not, get the flow specs on the heads and go from there.
06-11-2007, 06:02 PM
Thread Starter
Join Date: Feb 2006
Location:
Posts: 23
RE: hci
got cam, heads, and timing cover on. going to attempt rockers, may post pics when complete
06-15-2007, 01:36 PM
Thread Starter
Join Date: Feb 2006
Location:
Posts: 23
RE: hci almost complete need help
ground wires that was attatched to rear of driverside head, where to ground them now that have alum heads
06-15-2007, 02:22 PM
5th Gear Member
Join Date: Sep 2004
Location:
Posts: 3,145
RE: hci almost complete need help
You can still ground to the aluminum heads.
06-15-2007, 05:29 PM
Thread Starter
Join Date: Feb 2006
Location:
Posts: 23
RE: hci almost complete need help
thanx, put in bellhousing to motor, will see what happens
06-15-2007, 06:06 PM
3rd Gear Member
Join Date: Jul 2006
Location:
Posts: 882
RE: hci almost complete need help
Speak English PLEASE!!
06-15-2007, 06:14 PM
5th Gear Member
Join Date: May 2005
Location: Central New York
Posts: 3,850
RE: hci almost complete need help
BEER
hci
