LCAs ...going out of my freakin' mind!!!!

Reply Subscribe

Thread Tools

Search this Thread

06-16-2007, 06:04 PM

#11

HC_CrAzYHoRsE

Super Moderator

Thread Starter

Join Date: Oct 2005

Location: Montreal, Canada

Posts: 8,401

RE: LCAs ...going out of my freakin' mind!!!!

Quote:

ORIGINAL: tmajikman

I looked on their sit but they did not show the freeze stuff. I was there yesterday and was looking at it.

i might just make a trip over there and see if they have any.

06-16-2007, 06:07 PM

#12

tmajikman

5th Gear Member

Join Date: Oct 2006

Location: Woodstock, GA

Posts: 2,594

RE: LCAs ...going out of my freakin' mind!!!!

Well I hope it works for you, I am in no way affiliated with the sales department of the company that makes the product, lol. I have never done lca's so I can't really help any more than that. Let me know if that stuff works if you get it..

06-16-2007, 06:10 PM

#13

HC_CrAzYHoRsE

Super Moderator

Thread Starter

Join Date: Oct 2005

Location: Montreal, Canada

Posts: 8,401

RE: LCAs ...going out of my freakin' mind!!!!

i called them and i just got the feeling they thought i was a weirdo

...in other words, they don't know what i'm talking about, so i guess they don't have any.

06-16-2007, 06:13 PM

#14

Ze2222

2nd Gear Member

Join Date: Mar 2007

Posts: 337

RE: LCAs ...going out of my freakin' mind!!!!

I had the same problem easy solution is put a impact gun on the bolt and spin the **** until it breaks free, u will c all the rust n **** fall out.. If the exhaust is in ur way take off a couple of the rubber hangers just to drop it enough.. u'll c

06-16-2007, 06:19 PM

#15

HC_CrAzYHoRsE

Super Moderator

Thread Starter

Join Date: Oct 2005

Location: Montreal, Canada

Posts: 8,401

RE: LCAs ...going out of my freakin' mind!!!!

Quote:

ORIGINAL: Ze2222

I had the same problem easy solution is put a impact gun on the bolt and spin the **** until it breaks free, u will c all the rust n **** fall out.. If the exhaust is in ur way take off a couple of the rubber hangers just to drop it enough.. u'll c

i loosened one of the h-pipe bolts and the hanger from the tip so it's out of the way enough to reach the bolt but i can't really wail on it with a hammer... i did figure an impact gun would make it alot easier but i don't have any.