GaryBisiniere

what about upr?

TIM350

I had the same problem with the wheel hop. My problem was fixed when I replaced the u/l control arms with the bbk control arms from jegs and a new set of tires. One of my quadra shocks is busted too but I still don't get and wheel hop. My only problem now is when I rally geton it, the back end just lifts up off the pavement. Not sure how to fix that???

1985stang

I've heard good things about them, but Maximum Motorsports would be the best.

GaryBisiniere

what if i just bought a set of bushings for 60$?

GaryBisiniere

a buddy of mine said to just order new bushings what does every1 think

HC_CrAzYHoRsE

i think it might be worth a shot, if the only problem is indeed that they're too stiff it should take care of it.

MadMan@TheWheel

Some of the fastest Fox Bodies on the planet have been built using UPR components, MM makes great stuff, although they were not originally aiming for the straight liners when they started building their components. Here are some links. So we can get this thread over with.

http://www.maximummotorsports.com/
http://www.uprproducts.com/
http://www.ajeracing.com/

piedraco

thanks for all the info guys, I will let you know as soon as I decide what to do about this problem!

88scgt

i cant believe no one mentioned lakewood. imo lakewood is the best, i no some of the fastest cars in the world run upr, which upr is next inline for me

black_89gt

about summits u/l control arms? anyone heard anything about these. (they look similar to the granatellis)

http://store.summitracing.com/partde...p;autoview=sku