brake booster and master cylinder off a 95 gt to my 84
06-22-2007, 10:30 PM
#1
6th Gear Member
Thread Starter
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
brake booster and master cylinder off a 95 gt to my 84
well my buddy just wrecked his 95 gt looking the 5.0 off topic about it if you want. anyway im getting his whole brake set up spindels rear booster and master cylinder. my question is can i just put the brake booster and master cylinder on with out any modification?
06-22-2007, 11:03 PM
#2
Super Moderator
Join Date: Oct 2005
Location: Montreal, Canada
Posts: 8,401
RE: brake booster and master cylinder off a 95 gt to my 84
you need a 3 to 2 port conversion.... here ya go http://www.sn95brakes.com/product.php
06-23-2007, 12:11 AM
#4
5th Gear Member
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
RE: brake booster and master cylinder off a 95 gt to my 84
I've also remember reading in one of the mustang magazines they had to beat the inner fender a little to get a cobra booster in, not sure if they are the same as plain sn95 boosters. As for the master cylinder it will work but its ment for rear disc brakes.
06-23-2007, 01:17 PM
#5
6th Gear Member
Thread Starter
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
RE: brake booster and master cylinder off a 95 gt to my 84
ORIGINAL: ZachW04Stang
I've also remember reading in one of the mustang magazines they had to beat the inner fender a little to get a cobra booster in, not sure if they are the same as plain sn95 boosters. As for the master cylinder it will work but its ment for rear disc brakes.
I've also remember reading in one of the mustang magazines they had to beat the inner fender a little to get a cobra booster in, not sure if they are the same as plain sn95 boosters. As for the master cylinder it will work but its ment for rear disc brakes.
06-24-2007, 06:36 PM
#7
6th Gear Member
Thread Starter
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
RE: brake booster and master cylinder off a 95 gt to my 84
ORIGINAL: AdderMk2
keep in mind the SN-95 rear will push your rear wheels out 3/4" on each side
keep in mind the SN-95 rear will push your rear wheels out 3/4" on each side
Thread
Thread Starter
Forum
Replies
Last Post
