92FOX

I want to relocate the batter to the Trunk but i dont want to buy a $300 Dollar Relocating Kit
Im thinking all i have to get is long batter cable's to Run to the trunk , Any way's if any one know exacley what i need let me know i want to know how the shutoff handle works and stuff

Post pics of your relocation's if you have any?

pro tint

When I relocated mine I picked up the cable(4 gauge or smaller)from Lowe/Homedepot and get a box from the auto parts store. Cost less than $40.00 total.

92FOX

pro tint , Where did you ground it

pro tint

I split 3 grounds off the terminal and put one on the strut bolt, drilled a hole on the floor for the other and the last one mounted to one of the grounds for the taillights.

88BlueGT

I baugt the relocating kit from Taylor for like $170 with the polished box but I would never do that again. Dont get me wrong, the box is nice but not $170 dollars nice. I would just buy your own box and cable (I used 1 gauge) and piece the rest together. This is what you will need (maybe a few very minor things also but I think this is all you need)

Box
Negative/Positive Battery Cables
Vent Tube
Battery Hold Down
2 Threaded Rods
2 Wingnuts
4 Locknuts
2 Regular Nuts

Thats about it.

primetime5.0

my taylor box was 96$ and im 100$ into wiring, and still need a cut off switch, battery posts, and some 1 gauge lugs

mustangsally93

I got my kit from summit. It costed me 46 bucks. The ground isa 9/16 bolt that I drilled in the floor of the hatch.It looks nice.

aode08

a 2 guage amp kit, $30-50

88stangaruu

go to wal-mart and get a boat battery kit. Works great. I think its around $30-$45, not to sure though. Comes with the plastic box, pretty decent for the price. What my friend did in his hatch.

ruger311

go to airgas or a cheap welding supply store buy yourself some 1 gauge, 1/0 or 0/0 gauge welding lead wire and get some smash on or weld on ends and a on/off switch an your set,