Swapping Motor Mounts
#1
Swapping Motor Mounts
I can't get the two bolts to the block on each side loosened... I'm using a 3/8" drive ratchet with an extension and a 16mm socket. I probably should be using a breaker bar and 1/2" drive socket but don't want to spend $30 for those three things...
Let me know how you got yours off!
Thx!
Let me know how you got yours off!
Thx!
#2
RE: Swapping Motor Mounts
you need to be part contorshionist and have thick skin on your knuckles.
Bascially intuision, soak them down in some penetrating oil while you drink a beer/smoke a cig. then go at it. Thats all i can tell you.
As for the tools, you really need the right tools, that always helps, see if a buddy or something has them and borrow them or something.
Bascially intuision, soak them down in some penetrating oil while you drink a beer/smoke a cig. then go at it. Thats all i can tell you.
As for the tools, you really need the right tools, that always helps, see if a buddy or something has them and borrow them or something.
Thread
Thread Starter
Forum
Replies
Last Post
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM