kaminski347

I have a 93 5.0 with a stock bottom end on it. I have a TFS stage one cam and im looking to go bigger. I dont have heads right now but plan on going with the roush 180s and they have a 1.90/1.60 valve size. the cam im looking at is from CHP and the #s on the cam are 222/232 with a .510/.534 lift and a lope seperation of 112. let me know what u guys think. Is this too big?

4fit?

My recommendation would be to call Anderson Ford Motorsports and inquire about their nitrous cams. That .534 lift is pushing it on stock heads/pistions.

nemethjames1

i would give someone a call....

bobby

youre running stock pitons? how big of a shot?

kaminski347

i am running a 100 wet shot.

primetime5.0

stock pistons have been known to handle a 150 shot easily, a buddy of mine is dumping a 175 on a stock bottom end with aftermarket forged pistons

5_liters

Comp Cams has their "Nitrous HP" camshaft in Summits catalog.

its made specifically for nitrous applications and its only 120 bux.

i'd give Summit or Comp Cams a call to check it out.

vfast

now days thier isn't much difference in the mild nitrous cams if any...now when you go in the .700 lift range then yes.......street cams today are made to help various combos with the same cam...lunati can made you one for around 300.00