McNasty11jm

no its an auto...i was just worried becasuse i didnt have the money for the arms....i was just worried that the gears were goin to be a waste if i couldnt get any traction for em

shibby_cbs

if its an auto you may as well just go with 4.10's

FivePointOhh

you dont have to do everything at once. get the gears you want but you'll just wanna know, u/l will be a must sometime in the near future. save 200 bucks and get er done

Blckstng93

Get them torque boxes welded up to. And for an auto a 4.10 will be just fine. Even a 3.73 will do. Just make sure to get the right speedo gear.

GaryBisiniere

i have pretty bad wheel hop in my car i have granatelli uper and lower control arms trick springs and 50 50 drag shocks. what should i do to stop it?
i have bfg drag radial 275 60 15

iceman89gt

what year model car and whats the setting on the shocks.

GaryBisiniere

i have a 89 notch with 90 10s in the front and 50 50 drags in the back...

iceman89gt

one of two things, get a set of adjustable drag shocks or traction bars. first thing i would do is check the upper torque pan for damage also as this will cause serious wheel hop if its damaged to the point where the axle is pulling away from it.