Mass air conversion
 

I was gonna do the mass air conversion so is this all i need to successfully do it. I already have a 70mm tb.

The CPU.
http://www.latemodelrestoration.com/...1&comp=LRS

Wiring Harness
http://www.latemodelrestoration.com/...1&comp=LRS

Mass air sensor-76 mm
http://www.latemodelrestoration.com/...1&comp=LRS

Cold air intake
http://www.latemodelrestoration.com/...1&comp=LRS

RE: Mass air conversion
 

yes, thats a pretty complete setup. I'm assuming the wiring harness will come with instructions, but incase you didnt know, it will involve some cutting/splicing inside of your car, as well as relocatin 2 pins in the ecm connector. When you gfet to that part, be patient, make sure to double check which wires you are about to pull, then check again!

RE: Mass air conversion
 

doesnt that all pretty much come out to the ford racing kit thats 600 dollars i believe, price wise? only difference is youd be getting a cold air intake instead of a regular tubing...?

RE: Mass air conversion
 

you dont even really need a cold air to make it work.. you can ebay the MAS, you can make the wiring harness for it, and ebay the computer