Mass air conversion
#1
Mass air conversion
I was gonna do the mass air conversion so is this all i need to successfully do it. I already have a 70mm tb.
The CPU.
http://www.latemodelrestoration.com/...1&comp=LRS
Wiring Harness
http://www.latemodelrestoration.com/...1&comp=LRS
Mass air sensor-76 mm
http://www.latemodelrestoration.com/...1&comp=LRS
Cold air intake
http://www.latemodelrestoration.com/...1&comp=LRS
The CPU.
http://www.latemodelrestoration.com/...1&comp=LRS
Wiring Harness
http://www.latemodelrestoration.com/...1&comp=LRS
Mass air sensor-76 mm
http://www.latemodelrestoration.com/...1&comp=LRS
Cold air intake
http://www.latemodelrestoration.com/...1&comp=LRS
#2
RE: Mass air conversion
yes, thats a pretty complete setup. I'm assuming the wiring harness will come with instructions, but incase you didnt know, it will involve some cutting/splicing inside of your car, as well as relocatin 2 pins in the ecm connector. When you gfet to that part, be patient, make sure to double check which wires you are about to pull, then check again!
#3
RE: Mass air conversion
doesnt that all pretty much come out to the ford racing kit thats 600 dollars i believe, price wise? only difference is youd be getting a cold air intake instead of a regular tubing...?
Thread
Thread Starter
Forum
Replies
Last Post
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM