FivePointOhh

hahhaha 3k for a tranny. did you replace your throwout bearing at least?

Legally_Blown

3k? come on... that must be a bulletproof tranny good to 800ftlbs


yes, it is a bulletproof tranny. I will check my o2 sensors when it cools. Idk about the heat shields b/c I have catless exhaust. The throwout bearings were replaced. I had to buy a new bellhousing with the tranny.

shawnk007

My tail pipes rattle on my upper control arms........drives me nuts!

Legally_Blown

That might be the problem also. In about an hour I'm gonna go check it out and try everyone's idea. Right now its hot cause I went to get gas.

TwotoneVert

Dumps FTW!

Legally_Blown

i forgot what FTW means. but I have dumps also.

turbosha

you should check your o2 sensors. i heard somewhere................. someone said they could loosen. not a big fan of dumps, but you sure wont here your rattle anymore.!!! i would guess 3k for a tranny would be 1500 for the ford replacement part and 1500 labor. cause anyone that has built a car knows every nut and bolt of his/her stang. believe me ive been down to a hull, and back up again.

Legally_Blown

i would guess 3k for a tranny would be 1500 for the ford replacement part and 1500 labor


nope. about 2500 for tranny and bellhousing. the tranny is a bulletproof tranny. and about 300 for labor. I just rounded up to 3k.

onetrickpony

It better be armor piercing proof for $3K.

WhiteWindsor

I guess everyone must think i am an idiot(so does my wife), here is the story behind the multiple post. I am a civil service employee at Robins AFB, my computer at work has always let me browse this site but never post, so yesterday i thought i would give it another try. I was able to sign in and post, WoooHoooo, your tax dollars at work!!! Today i try to post and when i would hit the ok button i would get the same screen i used to get saying website has been blocked because of yada,yada,yada. Well i am persistent so i kept doing it, obviously about 4 or 5 times. Well now i see that even though the comp. kept saying website is blocked it looks like it really wasnt. My apologies.

Keith