whos running P's (what headers)
07-18-2007, 05:38 AM
#1
2nd Gear Member
Thread Starter
Join Date: Dec 2005
Location:
Posts: 384
whos running P's (what headers)
who is running P's what kind of headers can i run with them will long tubes work?? i no shorty equals wont but the unequal shorties will work....correct me if im wrong..
thanks
thanks
07-18-2007, 09:42 AM
#3
4th Gear Member
Join Date: Feb 2006
Location: Md
Posts: 1,119
RE: whos running P's (what headers)
I ran BBK unequal's.I only had to put a 90 deg boot on one of the spark plug wires.I will post some pics
[IMG]local://upfiles/29615/0C70B8DF4B8442DEB2BAE3386D38C808.jpg[/IMG]
[IMG]local://upfiles/29615/0C70B8DF4B8442DEB2BAE3386D38C808.jpg[/IMG]
07-18-2007, 09:53 AM
#4
4th Gear Member
Join Date: Feb 2006
Location: Md
Posts: 1,119
RE: whos running P's (what headers)
in the pic is the driver side.3rd one back is the one that you have to get a 90deg boot for the wire.You will also have to either remove the header to remove some of the spark plugs or cut down a spark plug socket simular to the Ls1 plug sockets.Pass side no issues.
[IMG]local://upfiles/29615/D768C5B01CF4457D9B56F0D98A264AE6.jpg[/IMG]
[IMG]local://upfiles/29615/D768C5B01CF4457D9B56F0D98A264AE6.jpg[/IMG]
07-18-2007, 11:06 AM
#6
3rd Gear Member
Join Date: May 2006
Location: Northeast GA
Posts: 617
RE: whos running P's (what headers)
the FRPP's will bolt on with no issues. the ceramic ones have a lifetime warranty if i remember right... not that it really matters, but they are stainless steel too
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM