Rebuild shopping list
I'm preparing to rebuild my engine for the first time. I'm gettin the E-303 cam with 1.7 roller rockers. my question is should I get hardened pushrods? I plan on running this rebuild for a long time. Would this be a smart move or a waste of money? thanks
|
RE: Rebuild shopping list
the hardened pushrods would last along time but i dont think u need them for a e303 cam & 1.7 rockers, maybe overkill, unless u plan on doing more mods in the future.
|
RE: Rebuild shopping list
There is lots lots more to come. I was also lookin at some timing chains. would something like that be smart?
|
RE: Rebuild shopping list
yeah a timing chain would be smart, try a double roller like edelbrocks, the stock one is weak and stretches it is recomeened to replace it 50,000 miles
|
RE: Rebuild shopping list
Wow, 50,000 miles. My engine has about 120,000 plus it had nitrous on it for about 50,000 of that.
|
RE: Rebuild shopping list
might as well take the block to a machine shop, and also port the heads and intake while your at it
|
RE: Rebuild shopping list
Might rethink the cam, heard that a lolt of people are dissappointed with their e-cams... Maybe like a 268H or something, if you are looking for a good Mild cam.
|
All times are GMT -5. The time now is 05:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands