5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

5.0 drag suspension kit?

Thread Tools
 
Search this Thread
 
Old 08-21-2007, 06:37 PM
  #11  
vtecisgay
Thread Starter
 
vtecisgay's Avatar
 
Join Date: Aug 2006
Location:
Posts: 30
Default RE: 5.0 drag suspension kit?

thanks guys this helped alot
vtecisgay is offline  
Old 08-21-2007, 06:38 PM
  #12  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: 5.0 drag suspension kit?

4cyl springs up front-new... 50 bucks
strange struts up front-120 a piece
air bags in rear stock springs-under 100, i forget tho
50/50 shocks for rear-not a whole lot of $
and deffinatly a drag radial, m/t et street radials 235/60/15 i got for 175 a piece
take off front sway bar-free

totaling up to... 720


this is similar to my set up
dimebag is offline  
Old 08-21-2007, 07:06 PM
  #13  
ZachW04Stang
5th Gear Member
 
ZachW04Stang's Avatar
 
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
Default RE: 5.0 drag suspension kit?

If you have tires already then the upr rear suspension kit, you can get it from a corral.net forum vender for 535 shipped. Check with artsparts on corral.net forums. He has some of the best prices.
4 cyl front springs- $30 at most used
subframe connectors -$50

BTW 2 kwik I've pulled 1.66 60ft with my mild motor and less then $800 in suspension. Then again I have almost $800 in parts in my rear end but thats not suspension.
ZachW04Stang is offline  
Old 08-21-2007, 08:31 PM
  #14  
2 kwik
I ♥ Acer
 
2 kwik's Avatar
 
Join Date: Apr 2006
Location:
Posts: 5,116
Default RE: 5.0 drag suspension kit?

cheater
I could scower up enough crap here I have maybe 3-400 in and do it...
2 kwik is offline  
Old 08-21-2007, 09:53 PM
  #15  
CrazyCobraSpeed
4th Gear Member
 
CrazyCobraSpeed's Avatar
 
Join Date: Jun 2006
Location:
Posts: 1,892
Default RE: 5.0 drag suspension kit?

hmm.. 800 bucks is my big problem here... i dont do things cheap so i doubt u want my advice... the strange 10 ways are a good choice tho... im either getting htem or an electronic air setup(my friend is trying ot talk me into one) but i would say drag radails are a must.... springs are a must... get used springs to save cash these other guys have made very good suggestions on which springs to go with.... im suprise i havent seen more Sub frame connector suggestions... u can get a cheap kit of ebay and weld them in yourself for 50 bucks or so... and that should help with chasis flex a lot i would think.... i dunno i and still having problems with the 800 buck thing... my suspension will cost no less than 2500 im sure... but thats not for a little while
CrazyCobraSpeed is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Granatelli Sales
GT S197 General Discussion
5
03-25-2016 08:01 PM
Granatelli Sales
S550 2015-2023 Mustang
5
12-27-2015 06:28 PM
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
3
09-18-2015 12:27 PM
vintageaion
2005-2014 Mustangs
2
09-08-2015 10:45 AM
RWHEELS
S197 Handling Section
4
09-05-2015 03:42 PM



Quick Reply: 5.0 drag suspension kit?



All times are GMT -5. The time now is 03:31 PM.