Tolerences
Hey guys i finally got my bottom end back from the machine shop from getting it vored all race balanced and the crank turned. I was wonderin about the crank main tolerence whats the tightest and the loosest. First ford bottom end for me is it the same as a chevy. It seems really tight to me was gonna check first see what you guys like em at. mine right now is at .002. THANKS
|
RE: Tolerences
I would ask the machine shop that did the prep for you.
|
RE: Tolerences
I wouldn't really want my bearing clearances much over .002. The factory specs are .0008-.0015 with a maximum allowable range of .0008-.0026 for both the mains and rods
|
All times are GMT -5. The time now is 05:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands