Tolerences - MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Tolerences

Reply

 
 
 
Old 08-22-2007, 05:48 PM
  #1  
88redhatchgt
Thread Starter
 
Join Date: Oct 2006
Location:
Posts: 18
Default Tolerences

Hey guys i finally got my bottom end back from the machine shop from getting it vored all race balanced and the crank turned. I was wonderin about the crank main tolerence whats the tightest and the loosest. First ford bottom end for me is it the same as a chevy. It seems really tight to me was gonna check first see what you guys like em at. mine right now is at .002. THANKS
88redhatchgt is offline  
Reply With Quote
Old 08-22-2007, 05:57 PM
  #2  
WhiteWindsor
5th Gear Member
 
Join Date: May 2007
Location: Warner Robins,GA
Posts: 2,872
Default RE: Tolerences

I would ask the machine shop that did the prep for you.
WhiteWindsor is offline  
Reply With Quote
Old 08-22-2007, 06:11 PM
  #3  
67mustang302
6th Gear Member
 
Join Date: Apr 2007
Location: California
Posts: 10,468
Default RE: Tolerences

I wouldn't really want my bearing clearances much over .002. The factory specs are .0008-.0015 with a maximum allowable range of .0008-.0026 for both the mains and rods
67mustang302 is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Acer2428
New Member Area
16
08-30-2013 03:05 PM
Amanda
Off Topic
1
10-26-2006 03:12 PM
Booster
Off Topic
12
09-13-2006 08:33 PM
88stangaruu
5.0L (1979-1995) Mustang
1
09-08-2006 03:43 AM
Jglisson
4.6L (1996-2004 Modular) Mustang
25
01-07-2006 12:21 PM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory