dcorley

Acquired this cam and set of lifters for free. My bottom end is stock (newly rebuilt), stock heads, stealth intake, holley 600 carb, longtube headers...what do i need to change to put this cam in, or will it even do much with the stock heads?




Intake // Exhaust
Valve Adjustment: 0 // 0
Gross Valve Lift: 0.534 // 0.534
Duration At 0.006 Tappet Lift: 292 // 292

Valve Timing At 0.006

Open // Close
Intake: 40 // 72
Exhaust: 80 // 32

These Specs Are For The Cam Installed At 106 Intake CL

Intake // Exhaust
Duration At 0.05: 244 // 244
Lobe Lift: 0.334 // 0.334
Lobe Separation: 110

AdderMk2

your car will run like crap with that cam and stock heads

2 kwik

and it's a roller?

tinman

292 adv duration X .534 is way too much for stock short-block......
IMHO, it'l run like crap............