Heads/cam/intake
I know this has been done to death, but does anyone have any ides on the best combo of heads, cam, intake on a 95 5.0 L with an automatic?
I'm a little new to the 5.0 L game so please forgive the newbie question. |
RE: Heads/cam/intake
Next time use the search button but here is a real good thread on it
https://mustangforums.com/m_2237047/tm.htm |
RE: Heads/cam/intake
edelbrock has a hci 367hp hyd flat cam,384 hyd roller cam 5.0///trick flow is good uless ya have domes/holley is ok2///
|
RE: Heads/cam/intake
ORIGINAL: stangman94 Next time use the search button but here is a real good thread on it https://mustangforums.com/m_2237047/tm.htm |
RE: Heads/cam/intake
You planning on supercharging eventually?
|
RE: Heads/cam/intake
It will depend on your goals, expectations, budget, driveability requirements, etc, etc. Is it a racer, daily driver, w/end car?.....
|
RE: Heads/cam/intake
The trick flow kit is a decent kit for the beginner who doesn't want the hassel of piecing together their own kit, however be prepared if you pick that kit to have a hunting idle/surging idle as a result of the stage one cam.....94-95 mustangs are very pickey when it comes to cam changes and the capability for the stock ecm to overcorrect for such changes resulting in the hunting idle....but this can be tuned out...you'll just have to get a custom tune or piece together your own kit and choose the steeda #19 cam that was developed with the 94-95 ecm in mind and it's a great cam to supercharge with.:D
|
RE: Heads/cam/intake
ORIGINAL: mjr46 The trick flow kit is a decent kit for the beginner who doesn't want the hassel of piecing together their own kit, however be prepared if you pick that kit to have a hunting idle/surging idle as a result of the stage one cam.....94-95 mustangs are very pickey when it comes to cam changes and the capability for the stock ecm to overcorrect for such changes resulting in the hunting idle....but this can be tuned out...you'll just have to get a custom tune or piece together your own kit and choose the steeda #19 cam that was developed with the 94-95 ecm in mind and it's a great cam to supercharge with.:D |
RE: Heads/cam/intake
anyone want a steeda cam????
I know someone selling one... if you know what I mean! |
RE: Heads/cam/intake
ill take it, email or pm me your address i been debating it when i do heads so f it
|
All times are GMT -5. The time now is 08:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands