5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

will it fit?

Thread Tools
 
Search this Thread
 
Old 08-26-2007, 09:24 PM
  #1  
ttocs
6th Gear Member
Thread Starter
 
ttocs's Avatar
 
Join Date: Feb 2006
Location:
Posts: 6,936
Default will it fit?

will an X-pipe off of a '01 GT fit a 94 GT? I am sure it would not since I found a deal on one....
ttocs is offline  
Old 08-27-2007, 01:09 PM
  #2  
ttocs
6th Gear Member
Thread Starter
 
ttocs's Avatar
 
Join Date: Feb 2006
Location:
Posts: 6,936
Default RE: will it fit?

does this mean I am an idiot for asking or does nobody know???????
ttocs is offline  
Old 08-27-2007, 01:11 PM
  #3  
jakeachy
3rd Gear Member
 
jakeachy's Avatar
 
Join Date: Jul 2007
Location: CF,WI
Posts: 970
Default RE: will it fit?

im sure with some persuasion and tender loving care it would.
jakeachy is offline  
Old 08-27-2007, 01:14 PM
  #4  
AdderMk2
Banned
 
AdderMk2's Avatar
 
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Default RE: will it fit?

ORIGINAL: ttocs

does this mean I am an idiot for asking or does nobody know???????

I didnt wanna say it
AdderMk2 is offline  
Old 08-27-2007, 01:24 PM
  #5  
ttocs
6th Gear Member
Thread Starter
 
ttocs's Avatar
 
Join Date: Feb 2006
Location:
Posts: 6,936
Default RE: will it fit?

I will freely admit I am an exhaust idiot, thats why I am askin. I a sound/security guy with 15 yrs experience but didn't get under the hood much.....
ttocs is offline  
Old 08-27-2007, 03:17 PM
  #6  
92whitelightning
1st Gear Member
 
92whitelightning's Avatar
 
Join Date: May 2006
Location:
Posts: 116
Default RE: will it fit?

you might be able to but look at it this way if it isnt a perfect fit make your hanger locations and weld new hangers on...
92whitelightning is offline  
Old 08-27-2007, 03:24 PM
  #7  
samseed101
6th Gear Member
 
samseed101's Avatar
 
Join Date: Jun 2006
Location: Maine
Posts: 5,693
Default RE: will it fit?

It's not going to fit. I just had a pain in the *** experience with an X-pipe I installed. To make a long story short, I ordered an X-pipe for my 95GT (same as a 94.) Well they sent me an X-pipe and sent the packing lable for the right part, but it was for a 96 - 98 4.6L V8. Took off my old exhaust and try to get it installed, only to find out that it couldnt clear the tranny and was actually coming up about 3 inches short on the passenger side. It was lcose and looked like it would fit but no dice.

At that point, I realized something was up and maybe they shipped the wrong part with the correct packing slip. And of course, that's exactly what happened.

My fault for not paying attention though. I should have noticed that the flange was wended on the passenger side of the X-pipe. That would ahve been a clue, LoL. That and the O2 sensors faced inward towards the tanny so that there was no way to install them... Clue number 2. But for some reason, I never noticed it until I tried to install it.

In other words, no ****ing way it will fit
samseed101 is offline  
Old 08-27-2007, 03:27 PM
  #8  
FivePointOhh
in limbo
 
FivePointOhh's Avatar
 
Join Date: Jan 2007
Location: Iowa
Posts: 7,300
Default RE: will it fit?

ORIGINAL: ttocs

I will freely admit I am an exhaust idiot, thats why I am askin. I a sound/security guy with 15 yrs experience but didn't get under the hood much.....
maybe thats why your having a slight bit of trouble with this one, your looking in the wrong area. X pipe is under the car.

to answer your question simply. no
FivePointOhh is offline  
Old 08-27-2007, 03:30 PM
  #9  
samseed101
6th Gear Member
 
samseed101's Avatar
 
Join Date: Jun 2006
Location: Maine
Posts: 5,693
Default RE: will it fit?

Maybe he means getting under the hood for the headers?[8D]
samseed101 is offline  
Old 08-27-2007, 03:31 PM
  #10  
FivePointOhh
in limbo
 
FivePointOhh's Avatar
 
Join Date: Jan 2007
Location: Iowa
Posts: 7,300
Default RE: will it fit?

ORIGINAL: samseed101

Maybe he means getting under the hood for the headers?[8D]
touché
FivePointOhh is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
mustangheaven
Motor Swap Section
3
01-03-2016 11:20 AM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM
fastbackford351
Classic Mustangs (Tech)
3
10-01-2015 12:24 PM
mdg
Archive - Parts For Sale
0
10-01-2015 07:04 AM



Quick Reply: will it fit?



All times are GMT -5. The time now is 05:50 AM.