mattkoly

Does anybody have a flow sheet that they could send me for this combination?

Any help would be greatly appreciated

Thank you

Matt K.

mattkoly

bump

TTGreenSN95

ditto I would love a flow sheet for one of those also!!!

samseed101

I assume you need the MAF transfer flow sheet for the 77mm that is calibrated to 30# injectors? Or am I misunderstanding you?

samseed101

Edited out original post: nevermind... found it....

samseed101

Try this flow sheet: I was able to access my stuff from work.

16.00 1542.585
5.00 1542.585
4.80 1381.888
4.60 1233.865
4.40 1097.248
4.20 971.529
4.10 912.726
3.90 802.468
3.70 702.350
3.50 611.103
3.30 528.727
3.20 490.707
3.00 419.991
2.80 357.131
2.60 301.116
2.50 275.769
2.30 229.132
2.10 188.578
1.90 153.346
1.70 122.930
1.60 109.750
1.40 85.924
1.20 65.901
1.00 49.426
0.80 36.245
0.70 30.669
0.50 21.291
0.30 14.194
0.10 9.125
0.00 7.350

mattkoly

Thank you, that's perfect

samseed101

No problem. Like I said, it's a generic ProM 77 so expect to have to tweak it some. But it will get you in the ballpark.

mattkoly

I'm sure I would have to tweek a lot no matter where i got the 30 pt curve from because i live at over 6000 feet.

I am goign to give it a try after i get car back together and i'll let you know results

Matt K.