Head Valves
09-08-2007, 06:45 PM
#1
6th Gear Member
Thread Starter
Join Date: Feb 2005
Location:
Posts: 5,205
09-08-2007, 07:21 PM
#3
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: Head Valves
HAHAHAHAHAAHAHAHAHAHA
^ that was directed at you 2kwik.
If those are really REV valves, then yes, thats a great deal and you should get them. I don't care what 2kwik think, Manleys are f*cking JUNK.
*edit* some of the brains that got Ferrea to the point of where they are (pretty much the best valves you can buy) went over to REV, and as such REV makes a very good quality valve.
to elaborate on the manleys, their metallurgy sucks ***** - the heads pop off, and can cause complete and utter devistation to your motor. the REV's are like the Ferrea's....... they dont break, rather when they are put in a bind, they BEND which saves you from having a piece of valve bouncing around in your cylinder taking out a cylinder wall, or destroying the chamber of the head.
how do i know? head shop experience and local track race motors. this thread is ALL me baby [8D][8D][8D][8D][8D][8D]
^ that was directed at you 2kwik.
If those are really REV valves, then yes, thats a great deal and you should get them. I don't care what 2kwik think, Manleys are f*cking JUNK.
*edit* some of the brains that got Ferrea to the point of where they are (pretty much the best valves you can buy) went over to REV, and as such REV makes a very good quality valve.
to elaborate on the manleys, their metallurgy sucks ***** - the heads pop off, and can cause complete and utter devistation to your motor. the REV's are like the Ferrea's....... they dont break, rather when they are put in a bind, they BEND which saves you from having a piece of valve bouncing around in your cylinder taking out a cylinder wall, or destroying the chamber of the head.
how do i know? head shop experience and local track race motors. this thread is ALL me baby [8D][8D][8D][8D][8D][8D]
I used that valve alot on a street engine..they work very well.....
Thread
Thread Starter
Forum
Replies
Last Post