The best HCI combo for under $1800 ?
#21
RE: The best HCI combo for under $1800 ?
ORIGINAL: KovacMotorsports
In my opinion a good budget H/C/I setup would be Thumper ported GT40p's with SS valves and a Crane rocker arm stud conversion, Scorpion roller rockers, TFS stage 1 cam, and a good used intake ( i.e. Eddy, Trick flow, Holley, etc.) or a new Typhoon.
In my opinion a good budget H/C/I setup would be Thumper ported GT40p's with SS valves and a Crane rocker arm stud conversion, Scorpion roller rockers, TFS stage 1 cam, and a good used intake ( i.e. Eddy, Trick flow, Holley, etc.) or a new Typhoon.
#24
RE: The best HCI combo for under $1800 ?
ORIGINAL: samseed101
It's not the best combo, but if someone was ever looking for a budget build you can get GT-40 heads, a GT-40 intake, and a decent camshaft for under $500 total
It's not the best combo, but if someone was ever looking for a budget build you can get GT-40 heads, a GT-40 intake, and a decent camshaft for under $500 total
#25
RE: The best HCI combo for under $1800 ?
again, can i mill the gt40 heads to regain compression w/o messing with the port and intake bolt alignment? if so, what amount is safe and what c/r should it net me?
#26
RE: The best HCI combo for under $1800 ?
ORIGINAL: tooslow5.0
again, can i mill the gt40 heads to regain compression w/o messing with the port and intake bolt alignment? if so, what amount is safe and what c/r should it net me?
again, can i mill the gt40 heads to regain compression w/o messing with the port and intake bolt alignment? if so, what amount is safe and what c/r should it net me?
find an explorer intake used on ebay
find a decent cam. I have a Steeda #19 for sale.... (atleast I will if I ever get it back)
#27
RE: The best HCI combo for under $1800 ?
[align=left]
HOW much power would you see in the gain???
ORIGINAL: samseed101
[/align]
It's not the best combo, but if someone was ever looking for a budget build you can get GT-40 heads, a GT-40 intake, and a decent camshaft for under $500 total
[/align]
It's not the best combo, but if someone was ever looking for a budget build you can get GT-40 heads, a GT-40 intake, and a decent camshaft for under $500 total
#29
RE: The best HCI combo for under $1800 ?
ORIGINAL: AdderMk2
I had that same basic setup when I was stock... I made 276rwhp
ORIGINAL: sofob0909
HOW much power would you see in the gain???
HOW much power would you see in the gain???
#30
RE: The best HCI combo for under $1800 ?
you can mill the heads, to a certain extent.. how much... i dont know
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T
yes, 276hp... I had a full exhaust, CAI, UDP's, 15° timing, adjustable fuel pressure regulator, and I tuned it with a Tweecer R/T