Dropping engine in with long tubes...
#1
Dropping engine in with long tubes...
Ive got a set of FlowTech long tubes just sitting in my basement. I found that if you dimple a few primaries, they work with GT40P heads.
Now, I know the FlowTechs are a royal pain to install, so I was wondering how difficult it would be to throw the engine in there with the long tubes bolted on them.
Now, I know the FlowTechs are a royal pain to install, so I was wondering how difficult it would be to throw the engine in there with the long tubes bolted on them.
#4
RE: Dropping engine in with long tubes...
I have a set of flowtech long tubes on mine and they are piece together headers...what your suppose to do is cut the flange in 3 spots on the passanger side and piece them together that way and on the driver side once.....I'm not a fan of the flowtechs even though I have them...knowing what I know now I'd of got a different set...they leaked at all the piece together joints and I had to wrap the joints with header wrap and clamp it as the exhaust fumes were abnoxious[:'(]
Thread
Thread Starter
Forum
Replies
Last Post
Gary Ugarek
4.6L (1996-2004 Modular) Mustang
8
08-26-2015 08:41 AM