5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

suspension chime in

Thread Tools
 
Search this Thread
 
Old 10-16-2007, 07:01 PM
  #1  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default suspension chime in

alright im looking for some chime ins on this my suspension is pretty much shot well the struts are any ways, i have plans in the mere future to beef some things up i was thinking of some 70/30's for the front and 50/50's for the rear, also some southside lift bars and upper control arms, now for the front i dont really know what i can do to upgrade it any body have any ideas or suggestions for my upgrade?
86Capri2GT is offline  
Old 10-16-2007, 07:09 PM
  #2  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: suspension chime in

sounds like you want to drag race... get strange 10 ways up front... not 70/30s, depending on how all out your going tubular a arms and k members are out there.... what about springs? imo... air bags in the stock rear, and 4cyl springs up front... unless your not on a budget....
dimebag is offline  
Old 10-16-2007, 07:12 PM
  #3  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default RE: suspension chime in

im sorry i forgot to mention i am on a slight budget i want a decent setup but not to break the bank with christmas coming right around the corner lol
86Capri2GT is offline  
Old 10-16-2007, 07:21 PM
  #4  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: suspension chime in

ok then in that case... front... strange 10 way struts, 4cyl springs, no sway bar...rear... air bags in stock springs(or some lowering springs), cheaper control arms, some cheap 50/50s...

this pic is with just the front suspension mentioned above... stock rear suspension... stock car...



for a budget, thats the way to go imo
dimebag is offline  
Old 10-16-2007, 07:26 PM
  #5  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default RE: suspension chime in

that pic looks awesome with that setup especially on a stock car ill have to check out the strange 10's and for the 4 cyl springs the local junk yard
86Capri2GT is offline  
Old 10-16-2007, 07:31 PM
  #6  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default RE: suspension chime in

so far the stranges will run me about 240 for the pair and the rears which are lakewood 100 for the pair so 340 isnt too bad also would u suggest ss liftbars? and plain ol aftermarket uppers?
86Capri2GT is offline  
Old 10-16-2007, 07:34 PM
  #7  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: suspension chime in

i forgot to tell you, thats on a drag radial, but i mean if dragracin is ur thing, drag radials should have been one of your 1st mods imo... theyll give you about a half second...

strange 10 ways are the ****... basically i can launch like that, or with my soft springs and no swaybar, i can make it handle better than stock...

and as for the 4banger springs, yup junkyard, or autozone has em new... for like 60 bucks
dimebag is offline  
Old 10-16-2007, 07:36 PM
  #8  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default RE: suspension chime in

bam im one step ahead lol i got some 275 50 15 m/t et streets sittin on 8" weld draglites lol they are monstorous lol M/T FTW!!!!
86Capri2GT is offline  
Old 10-16-2007, 07:38 PM
  #9  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: suspension chime in

i wanna get those lift bars, their suposed to be top of the line... but cheap **** will do if your on a budget...

some one makes a 3way shock for the rears... and 50/50 is an option w. them... their cheaper then the lakewoods...if they still have them at summit...

if you dont have a drag radial or a good tire, id suggest trying to inc. about 300 into ur budget for them, you wont regret it...
dimebag is offline  
Old 10-16-2007, 07:42 PM
  #10  
86Capri2GT
1st Gear Member
Thread Starter
 
86Capri2GT's Avatar
 
Join Date: Sep 2007
Posts: 66
Default RE: suspension chime in

post #7 lol oh also ebay has the upr ssm liftbars my buddy had them on his 98 cobra and they worked great *** hopped up she ment business lol
86Capri2GT is offline  


Quick Reply: suspension chime in



All times are GMT -5. The time now is 01:40 PM.