xgregrandomx

I just ordered my trickflow intake and a 75mm tb and trickflow tb adapter i do have bigger plans down the raod, but for now i have a fcam, bbk headers, bbk o/r h pipe, american thunder exhuast, bbk CAI, and 3.73s. What im wondering is that is the 75mm throttle body to big and gunna make me lose power or will it preform the size of the MAF and not hinder the power? thanks for all the help

91hatchgt

You will probably lose a little low end, but gain top, at least until you get a good set of flowing heads.

xgregrandomx

Will porting and polishing slove that problem till i get new heads?

stanglx2002

no

91hatchgt

Yes as long as you get a good port job done to them, it is the same thing as getting high flowing heads.

I would just save the money that you would use on getting them ported and buy a set of aluminum heads instead.

stanglx2002

aluminum is better than the stock heads

91hatchgt

Oh yeah! Definately, I was not saying that they werent, I was just saying if he wanted to port his heads for the better flow with that TB anf MAF< then that would work, or he could just get a new set of AFR's

stanglx2002

i know im just puttin on I/C and puttin on heads later i dont have the money for heads yet but i wanted to do my suspension first. i know what u were saying though

91hatchgt

this is very typical..I am doing the Intake and 1.7 Rollers to make my cam bigger.. This is happening today!! And I won't have the money for heads until September at the latest... Hopefully not that long if I can sell a few things.

stanglx2002

i hope you can get them soon

nice car i have the same color too