motorman524

I hate this question, but how many horses will i be making with my setup? refresher: GT40p's with 1.7 rollers and exhaust mlled .003, e303, GT40E intakes. other basic bolt-ons like ud pullies and cai. and well say a 76 mm mass air meter from c&l but i dont actually have the mass air meter..

ctgreddy

not close to 300 with gt40 stuff.
and if you dont want to get it dyno tuned it'll be even worse.
id guess around 250ish to the wheels

motorman524

really? an article produced in 50 mustang and super fords reported a gain of 25 hp with 1.6 rockers. stock 225 + 25 is 250 hp alone with these heads.

motorman524

so if my setup is good with 19 lb injectors, i see no need for tuning. correct?

white93pony

im runnin a similar setup and 19# injectors would not work. my car was lean at all times run like crap till i found that out. you need 24# and you should be around 280-290 at the wheels.

motorman524

Thank you for that very much for that conformation!