someone help (adder u might know the part#)
11-12-2007, 09:52 PM
#1
4th Gear Member
Thread Starter
Join Date: Apr 2006
Location:
Posts: 1,174
someone help (adder u might know the part#)
ok need big help, i went to go buy rotors and autozone doesnt sell the right ones for 94-95. i have a 5 lug conversion with the whole rotr and hub as one. does any one know the part # i need to order, or is there a different year i should order for?
11-12-2007, 10:32 PM
#2
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
RE: someone help (adder u might know the part#)
ORIGINAL: blk40th
ok need big help, i went to go buy rotors and autozone doesnt sell the right ones for 94-95. i have a 5 lug conversion with the whole rotr and hub as one. does any one know the part # i need to order, or is there a different year i should order for?
ok need big help, i went to go buy rotors and autozone doesnt sell the right ones for 94-95. i have a 5 lug conversion with the whole rotr and hub as one. does any one know the part # i need to order, or is there a different year i should order for?
11-13-2007, 08:36 AM
#4
4th Gear Member
Thread Starter
Join Date: Apr 2006
Location:
Posts: 1,174
RE: someone help (adder u might know the part#)
they were already on there when i bought the car. i think it might be the 92 lincoln rotors. it still has the 88 pads and calipers, so i would say thats still the 88 spindle also. the hub is big in the center and knocked the center of my rim out so i think its that big lincoln hub in the center.
11-13-2007, 01:03 PM
#8
3rd Gear Member
Join Date: Mar 2006
Location:
Posts: 691
RE: someone help (adder u might know the part#)
the lincoln and the svo rotors are the same exact thing why your at it get the front calipers for an svo as they are bigger than the stock ones and will be an improvement over stock
11-13-2007, 04:11 PM
#9
4th Gear Member
Thread Starter
Join Date: Apr 2006
Location:
Posts: 1,174
RE: someone help (adder u might know the part#)
ive been having the worst time trying to get these rotors. ordered them to come in for tomorrow and i hope they are right. i wish i had the money to do calipers right now. will they bolt up to the 88 bracket and brake line. um doing the wheel bearings and lines also. rhis has to be the worst day tho. i found out my head gaskets are leaking now.
11-13-2007, 04:33 PM
#10
2nd Gear Member
Join Date: Oct 2007
Location: Ft. Lauderdale FL
Posts: 337
RE: someone help (adder u might know the part#)
That sucks. I'm in a crappy situation with front rotors too, my 5 lug was done before i bought it too, i'm 99% sure my rear end is complete from a 95 because of the abs speed sensors and wiring attached to it, but as far as my fronts go, i have no idea, and i think i have a bad wheel bearing because it moans with weight transfer when i turn, but i don't know what wheel bearing to buy because i don't know what spindles/hubs/rotors are in the damm thing. SUCKS.